In 2022, we established our own karting team to support young drivers – KRE Racing Team. We use Alonso Kart chassis and IAME engines.
Thanks to this, we also started producing some parts for Alonso/Kart republic chassis. We took the original parts and tried to improve their realiability and lifespan. You can now order these items for your chassis.
Parts offered
Lower Rod Front Panel KR/FA
21,20 EUR incl. VAT
Stainless steel thickness 3 mm.
Without fasteners.
Key adjusting Caster KR/FA
6,50 EUR incl. VAT
Stainless steel thickness 3 mm.
Exhaust pipe spring mounting plate – Iame OK – OKJ
3,50 EUR incl. VAT
Iame OK – OKJ – exhaust pipe spring mounting plate (plate springs exhaust manifold).
Anchor holes for M6, axially 31mm apart.
Holes for attaching the spring 3x diameter 5mm.
Stainless steel 3mm.
The price is for 1 pc.
You need 2 pcs for both sides of the exhaust.
Without fasteners.
Deflector Radiator – standard size
10,50 EUR incl. VAT
Deflector for all radiators (to avoid tire debris go back to spoil the radiator).
For anchor points with the standard distance 22 cm.
Thanks to multiple holes, it can also be used for different distances of anchor points with axial distance between 172 – 263 mm.
Designed for NL, AF and other radiators according to the given hole spacing.
Weight: 112g (lighter than the NL deflector)
Deflector Radiator – larger size
11,50 EUR incl. VAT
Deflector for all radiators (to avoid tire debris go back to spoil the radiator). The larger size of the deflector (5cm higher) also covers the upper surface of the radiator above the upper support.
For anchor points with the standard distance 22 cm.
Thanks to multiple holes, it can also be used for different distances of anchor points with axial distance between 172 – 263 mm.
Designed for NL, AF and other radiators according to the given hole spacing.
Weight: 131g
Drain hole protection cap for OKJ-OK-X30. Conical fixing.
4,50 EUR incl. VAT
Drain hole protection cap for OKJ-OK-X30.
Conical fixing.
Also available for other engine types.
Price according to size, but maximum 6,5eur.
Cable connectors holder for Alfano
9,50 EUR incl. VAT
Cable connectors holder for Alfano cables A2180, A2190, etc.
Fastening with a tightening tape.
The connectors snap into the holder. For increased securing, it is possible to use another tape, for which a groove is prepared in the holder.
Compatible with Alfano A5004.
Aerosol Can Holder
from 15,90 EUR incl. VAT
Can holder (aerosols) for easy access and less clutter in the workplace, which can be mounted on the wall or side of the workbench (Sortimo) in the van.
The color can be according to your request.
It is possible to cute your logo on the right part of the holder for an additional fee (the amount of the additional fee will be specified according to the shape of the logo and the number of pieces ordered).
Available in a version with:
4 slots …. 19,90 euros
6 slots …. 23.90 euros
3D models of karting circuits
price according to agreement EUR incl. VAT
Models of any (ITA, ESP, DEU, BEL, FRA, CZE, SVK, AUT, DNK, FIN, HUN, NLD, GBR, PRT, SWE, etc.) go-kart circuit with realistic track width.
Size up to 36-42cm in total, or larger from several parts (must be glued afterwards).
The price will be specified according to the size and material.
Roughly:
– size 150mm, height 3.5mm …. 2,5eur
– size 200mm, height 4.7mm …. 4,5eur
– size 300mm, height 7.0mm …. 11,5eur
– size up to 350mm, height 7.0mm …. 15eur
– size 360-420mm, height 10.0mm …. 17-21,5eur
Note: dimension given as maximum diagonal.
3D models of F1 and race car circuits (without real track width) also available.
Interested in our karting products? Order here!
Contact us with email with products you want to buy, shipping address and we will arrange everything with you.